Rear Bumper - Škoda Scala | Skoda-Parts.com
- Bumper [3]
- Bumper Holders [9]
- Parking Sensors (PDC) [11]
- Trims [13]
Sheet-Metal Screw M5x16 (2 items)
Bolt for the sheet-metal plate with an internal hex head.
N 909 747 01 Citigo, Enyaq, Fabia 2, Fabia 3, Fabia 4, Kamiq, Karoq, Kodiaq, Octavia 2, Octavia 3, Octavia 4, Rapid, Roomster, Scala, Superb 2, Superb 3, Yeti- On Stock
0,31-0,51 € incl. VAT Show productsExpanding Nut 4.8mm
Expanding nut for attaching the front bumper bracket, front and rear bumper reinforcement, plastic wheel housing, the lever holder for bonnet opening.
WHT 004 694 Citigo, Enyaq, Fabia, Fabia 2, Fabia 3, Fabia 4, Kamiq, Karoq, Kodiaq, Octavia 2, Octavia 3, Octavia 4, Rapid, Roomster, Scala, Superb 2, Superb 3- On Stock
0,81 € incl. VAT Show productsExpansion Nut
Expansion nut for rear bumper guide profile, plastic wheel arch, B-pillar panel, variable boot floor.
N 106 213 01 Citigo, Enyaq, Fabia 3, Fabia 4, Kamiq, Karoq, Kodiaq, Octavia 3, Octavia 4, Rapid, Scala, Superb 3- On Stock
0,86 € incl. VAT Show productsPlastic Nut M6 (2 items)
Hexagon plastic collatr nut to fastening rear bumper holders.
N 910 189 01 Enyaq, Fabia 3, Fabia 4, Kamiq, Karoq, Kodiaq, Octavia 2, Octavia 3, Octavia 4, Rapid, Scala, Superb 3- On Stock
0,56-0,96 € incl. VAT Show productsO-Ring Seal
Sealing ring for the parking sensors, black design, for the Yeti model after MY 2014 (facelift).
5Q0 919 133 9B9 Fabia 3, Fabia 4, Kamiq, Karoq, Kodiaq, Octavia 3, Rapid, Scala, Superb 3, Yeti- On Stock
0,81 € incl. VAT Show productsParking Sensor Hole Cutter Tool
Original tool for punching holes in the bumper to install parking sensors, 18mm diameter.
BEA 000 001 Citigo, Enyaq, Fabia 2, Fabia 3, Kamiq, Karoq, Kodiaq, Octavia 3, Octavia 4, Rapid, Roomster, Scala, Superb 2, Superb 3, Yeti- On Stock
15,08 € incl. VAT Show productsParking Sensor (3 items)
Ultrasonic sensor for the parking assist (PDC). To find the right sensor for your car, check the table on the link below.
5Q0 919 275 B GRU Fabia 3, Fabia 4, Kamiq, Karoq, Octavia 3, Rapid, Scala, Superb 3, Yeti- On Stock
26,72-106,69 € incl. VAT Show productsCargo Edge Protective Cover
The protective cover of the load edge contains a foam reinforcement to dampen any impact during loading, which also makes sitting on the load edge mor...
3P0 071 336 Fabia 4, Kamiq, Karoq, Octavia 4, Scala, Superb 3, Superb 4104,72 € incl. VAT Show productsParking Sensor
Ultrasonic sensor for the parking assist (PDC). To find the right sensor for your car, check the table on the link below.
5Q0 919 275 C 9B9 Kamiq, Kodiaq, Scala108,40 € incl. VAT Show productsRear Bumper Strip
Decorative moulding for the rear bumper loading edge, glossy black finish.
657 061 195 Scala64,23 € incl. VAT Show productsProtective Foil
Transparent self-adhesive foil for the rear bumper loading edge.
657 061 197 Scala36,70 € incl. VAT Show productsGuiding Profile Rear Left
Rear bumper guiding profile, rear left.
657 807 393 Scala13,11 € incl. VAT Show productsGuiding Profile Rear Left
Rear bumper guiding profile, rear left.
657 807 393 A Scala14,92 € incl. VAT Show productsGuiding Profile Rear Right
Rear bumper guiding profile, rear right.
657 807 394 Scala13,11 € incl. VAT Show productsGuiding Profile Rear Right
Rear bumper guiding profile, rear right.
657 807 394 A Scala14,52 € incl. VAT Show productsRear Bumper
Rear bumper for vehicles manufactured to MY2023 (pre-facelift).
657 807 417 Scala499,59 € incl. VAT Show productsTowing Lug Cover
Rear bumper towing eye cap for vehicles manufactured to MY2023 (pre-facelift).
657 807 441 Scala4,84 € incl. VAT Show productsBumper Cover - Lover
Lower plastic black rear bumper cover, suitable for vehicles without towing device manufactured to MY2023 (pre-facelift).
657 807 521 9B9 Scala81,07 € incl. VAT Show productsBumper Cover - Lover
Lower black plastic rear bumper cover, suitable for vehicles with towing device manufactured to MY2023 (pre-facelift).
657 807 521 A 9B9 Scala77,14 € incl. VAT Show productsBumper Cover - Lover
Lower plastic rear bumper cover, primed, suitable for the Monte Carlo models without towing device manufactured to MY2023 (pre-facelift).
657 807 521 B Scala86,42 € incl. VAT Show products