26.10.2019, 15:57
Michael Kovařík
Mohu potvrdit. Jeden vodici cep(ten, ktery ma byt zkoseny) do drzaku nelze vlozit. Pouzity puvodni. Zatim trmen instaluji, dam dalsi info po namontovani celeho trmenu.
Brake Caliper - Right Rear Hella | Skoda-Parts.com
Škoda part number:
- 1J0 615 424 B
TIP: Did you know, you can check parts compatibility with your vehicle using chassis number? Sign Up or Log In to your account and add your car to virtual garage.
right rear axle brake caliper from the VIN number 1U-Y-294001 for 232x9mm and 239x9mm discs, piston diameter: 41mm
What cars does this part fit? [+]
Part suitable for Škoda Octavia , engines:
×| Capacity | Power | Code | Year |
| 1.4 MPI | 44kW/60PS | AMD | 02/1999 → 07/2000 |
| 1.4 MPI | 44kW/60PS | AMD | 08/2000 → 03/2001 |
| 1.4 16V | 55kW/75PS | AXP | 08/2000 → 12/2010 |
| 1.4 16V | 55kW/75PS | BCA | 08/2000 → 12/2010 |
| 1.6 MPI | 55kW/75PS | AEE | 07/1996 → 07/2000 |
| 1.6 MPI | 55kW/75PS | AEE | 08/2000 → 09/2004 |
| 1.6 MPI | 74kW/100PS | AEH | 02/1997 → 07/2000 |
| 1.6 MPI | 74kW/100PS | AEH | 08/2000 → 12/2007 |
| 1.6 MPI | 74kW/100PS | AKL | 12/1997 → 07/2000 |
| 1.6 MPI | 74kW/100PS | AKL | 08/2000 → 12/2007 |
| 1.6 MPI | 75kW/102PS | AVU | 08/2000 → 12/2010 |
| 1.6 MPI | 75kW/102PS | BFQ | 08/2000 → 12/2010 |
| 1.8 20V | 92kW/125PS | AGN | 01/1997 → 07/2000 |
| 1.8 T | 110kW/150PS | AGU | 12/1997 → 07/2000 |
| 1.8 T | 110kW/150PS | AGU | 08/2000 → 12/2010 |
| 1.8 T | 110kW/150PS 4x4 | ARX | 08/2000 → 05/2006 |
| 1.8 T | 110kW/150PS | ARZ | 09/1999 → 07/2000 |
| 1.8 T | 110kW/150PS | AUM | 12/1997 → 07/2000 |
| 1.8 T | 110kW/150PS | AUM | 08/2000 → 12/2010 |
| 1.8 T | 132kW/180PS RS | AUQ | 12/2000 → 01/2006 |
| 2.0 MPI | 85kW/115PS | AEG | 08/2000 → 05/2007 |
| 2.0 MPI | 85kW/115PS | APK | 05/1999 → 07/2000 |
| 2.0 MPI | 85kW/115PS | APK | 08/2000 → 05/2007 |
| 2.0 MPI | 85kW/115PS | AQY | 05/1999 → 07/2000 |
| 2.0 MPI | 85kW/115PS | AQY | 08/2000 → 05/2007 |
| 2.0 MPI | 85kW/115PS | AZH | 04/2000 → 07/2000 |
| 2.0 MPI | 85kW/115PS 4x4 | AZH | 08/2000 → 09/2004 |
| 2.0 MPI | 85kW/115PS 4x4 | AZJ | 08/2000 → 09/2004 |
| 2.0 MPI | 85kW/115PS | AZJ | 03/2002 → 01/2006 |
| 1.9 SDI | 50kW/68PS | AGP | 05/1997 → 07/2000 |
| 1.9 SDI | 50kW/68PS | AQM | 08/2000 → 12/2003 |
| 1.9 TDI | 66kW/90PS | AGR | 10/1996 → 07/2000 |
| 1.9 TDI | 66kW/90PS 4x4 | AGR | 11/1999 → 02/2006 |
| 1.9 TDI | 66kW/90PS | AGR | 08/2000 → 03/2010 |
| 1.9 TDI | 66kW/90PS | ALH | 08/2000 → 03/2010 |
| 1.9 TDI PD | 74kW/100PS 4x4 | ATD | 08/2000 → 01/2006 |
| 1.9 TDI PD | 74kW/101PS | AXR | 10/2005 → 12/2010 |
| 1.9 TDI | 81kW/110PS | AHF | 08/1997 → 07/2000 |
| 1.9 TDI | 81kW/110PS | AHF | 08/2000 → 01/2006 |
| 1.9 TDI | 81kW/110PS | ASV | 09/1999 → 07/2000 |
| 1.9 TDI | 81kW/110PS | ASV | 08/2000 → 01/2006 |
| 1.9 TDI PD | 96kW/131PS | ASZ | 09/2002 → 09/2004 |
This part occurs in the following categories:Spare Parts → Brake System → Rear Axle → Rear Disc Brake → Brakes 232x9mm → Brake Calipers
Spare Parts → Brake System → Rear Axle → Rear Disc Brake → Brakes 239x9mm → Brake Calipers
Spare Parts → Brake System → Rear Axle → Rear Disc Brake → Brakes 239x9mm → Brake Calipers
Manufacturer facts [+]
Manufacturer facts: Hella
Hella offers a wide selection of spare parts. On the one hand, an extensive electronics program for ever-increasing repair volumes - with sensors, actuators and controllers. On the other hand, a wide-ranging electrical system program for many years developed, ranging from acoustic signals through relays, switches, starters and generators, washer pumps to innovative lighting products. In the area of temperature management, the Behr Hella Service is one of the leading suppliers of vehicle air conditioning and engine cooling in the aftermarket. This division was bought by Mahle at the beginning of 2020.
Alternative parts
You will also need
Discussion
26.9.2019, 22:39
Libor
Dobrý den, jen bych chtěl ohodnotit produkt. Nikde jsem k tomu nenašel prostor tak píšu sem. Objednal jsem čínské třmeny, říkal jsem si že přece fungovat musí (a faktura se zálohou za FTE byla vysoká). No fungovat by asi mohly i přesto, že horní vodítko (vodítka jsou součástí čínského třmenu) do držáku nesedí a je třeba použít původní, ale bohužel buď na tělo třmenu byl použit nevhodný materiál nebo prostě čínský závit....či výstupní kontrola selhala, nevím. Přitáhnutí brzdové trubky aby těsnila se bohužel nepovedlo a závit nevydržel. Naštěstí vnitřek byl kopírovaný dobře takže po přeskládání do origo těla funguje, tak snad vydrží.
